To protect yourself from hazardous moving parts of power tools and equipment, always use a/n _______________________ when using the equipment.

When you position a ladder against a wall that is 20 feet high, how far from the wall should you place the ladder?

Who is responsible for providing PPE?

Common causes of foot injuries include: crushing, penetration, molten metal, chemicals, slippery surfaces, and sharp objects.

Safety controls must meet the following order of priority:

Which type of hard hat would provide the most protection from electrical hazards?

The need for hearing protection is triggered at which decibel level?

Which of the following is not considered PPE?

How old do you have to be to operate a forklift, regardless of training?

One good way to prevent materials handling hazards is to _____.

If you use a personal fall arrest system for fall protection, you must rig it so that a worker can fall no more than ______ nor contact any level.

Which of the following is a method for eliminating or reducing crane operation hazards?

Nearly 45% of crane accidents are the result of the boom or crane making contact with ___.

Before beginning equipment operations, the employer must ___.

Which of the following must be readily available to the crane operator for use at all times?

Who is responsible for inspecting all machinery and equipment prior to each use and during use, to make sure it is in safe operating condition.

What is the minimum distance that excavation materials, tools, and other supplies be kept back from the excavation’s edge?

What is the greatest hazard facing a worker while working in a trench?

Scaffold plans must be developed by a _____.

When portable ladders are used for access to an upper landing surface, how many feet above the upper landing must the side rails extend?

Handrails must be able to withstand, without failure, how many pounds of weight applied within 2 inches of the top edge in any direction or outward direction?

A non-self-supporting ladder should be set up at _____ (horizontal distance/working length of ladder).

Which of the following is not considered PPE?

The best material for a step ladder used by an electrician who may be working near energized conductors is:

If you paint wooden scaffold planks,